Decoration Instructions | How long does it usually take for tile adhesive to form a film?

However, when talking about how long it usually takes for tile adhesives to form films, we still need to understand what tile adhesives are, so let’s take a look!

1. What is tile adhesive

Tile adhesive is a new modern decoration material used for pasting ceramic tiles, tiles, floor tiles and other decorative materials.

2. Product characteristics of tile adhesive

High adhesion, no need to soak bricks into wet walls during construction, good flexibility, waterproof, impermeable, crack-resistant, aging resistance, high temperature resistance, freeze-thaw resistance, non-toxic and environmentally friendly, and easy to construct.

3. Construction method of tile adhesive

1. Surface treatment

All surfaces should be solid, dry, clean, non-shaky, and free of oil, wax stains and other loose materials;

The painted surface should be roughened to expose at least 75% of the original surface;

After the new concrete surface is completed, it needs to be cured for six weeks before tiles can be laid, and the newly plastered surface should be cured for at least seven days before tiles can be laid;

Old concrete and plastered surfaces can be cleaned with detergent and then rinsed with water. The surface can be laid after it is dried;

The substrate is loose, highly absorbent, or the dust and dirt floating on the surface are difficult to clean. You can first apply Lebanese primer to help the ceramic tiles adhere to each other.

2. Stir and mix

Put the TT powder into clean water and stir into a paste. Be careful to add the water first and then the powder. You can use a manual or electric mixer when stirring;

The mixing ratio is 25 kg of powderAdd about 6 to 6.5 kilograms of water; the ratio is about 25 kilograms of powder and 6.5 to 7.5 kilograms of additives;

Stir thoroughly to ensure there is no dough. After mixing, it must be left still for about ten minutes and stirred briefly before use;

The glue should be used within about 2 hours according to weather conditions (the skin on the surface of the glue should be removed and not used). Never add water to dried glue before use.

3. Construction technology

Use a toothed scraper to apply the glue on the working surface so that it is evenly distributed and formed into a tooth shape (adjust the angle between the scraper and the working surface to control the thickness of the glue). Apply about 1 square meter each time (depending on the weather temperature, the required construction temperature range is 5 to 40 degrees Celsius), and then knead the tiles on it within 5 to 15 minutes (adjustment takes 20 to 25 minutes within);

When choosing the size of the tooth scraper, you should consider the flatness of the working surface and the convexity and concavity of the back of the ceramic tile;

If the gap on the back of the tile is deep or the stone or tile is large and heavy, double-sided glue should be applied, that is, glue should be applied to the working surface and the back of the tile at the same time;

Pay attention to retaining the expansion joints; after the tile laying is completed, the next step of filling the joints can only be carried out after the glue has completely dried (about 24 hours); before drying, use a damp cloth or sponge to clean the surface of the tiles (and tools ) clean up. If curing exceeds 24 hours, stains on the surface of the tiles can be cleaned with tile and stone cleaner (do not use acidic cleaners).

4. How long does it usually take for tile adhesive to form a film?

When it comes to this topic, the easiest way to get mad is to watch the decorator while he is sitting down step by step when renovating the house, or just ask the master.

The above content is the content of the article that the editor shared with you today about How long does it usually take for tile adhesive to film? I hope it will be helpful to you! Slip, slip, slip!